8J ET42
CURRENT WHEEL SPECS | |
---|---|
Width [in] 1)* |
|
Offset [mm] 2)* |
|
Spacer [mm] 3)* |
|
5 mm
5 mm
8J ET50
NEW WHEEL SPECS | |
---|---|
Width [in] 1)* |
|
Offset [mm] 2)* |
|
Spacer [mm] 3)* |
|
From the outside (front of the rim), the new rim will protrude 86 mm in relation to the reference rim.
From the inside, the new rim will be 5 mm further from the suspension components in relation to the reference rim.
From the inside, the new rim will be 5 mm further from the suspension components in relation to the reference rim.
Description of parameters:
1) Rim width in inches (without rim). It can be read on the inside of the rim.
2) ET, parameter denoting the distance of the mounting plane from the symmetry axis (from the half-width) of the rim, expressed in millimeters.
3) Distance increasing the track, if installed, enter its thickness.